Common reasons for poor ice making by ice makers

Usually, after buying an ice maker, people start to operate it themselves, but sometimes due to improper operation, the commercial ice maker does not make ice, or the ice maker does not make ice properly, the ice maker does not make enough ice, and sometimes even causes ice machine de-icing failure and other problems. Shanghai Snowman tells you the common reasons for this problem with years of experience.

Intermittent operation of the compressor:

1. The voltage is too low. Check the power supply.

2. The contact point is burned and the contact is not good.

3. System pressure protection.

4. The compressor starter is faulty.

5. The condenser is too dirty, high pressure protection.

Reduced ice production

1. The capillary or expansion valve is blocked.

2. The water in the system is too high and there is a slight ice blockage.

3. The ice maker condensation system is blocked.

4. Insufficient refrigerant or leakage.

5. The evaporator is too dirty.

The machine is running but no ice is produced

1. The water pan is not enough or there is no water.

2. Reducer failure or reduction motor failure.

3. System failure, ice blockage, dirt blockage, etc.

 4. Ice maker leaks refrigerant, pressure is insufficient.

 5. Ice cubes are not thick enough.

Keywords：
ice maker、Ice cubes、 ice machine、commercial ice maker